Theoretical and Natural Science
- The Open Access Proceedings Series for Conferences
Vol. 34, 02 April 2024
* Author to whom correspondence should be addressed.
The shock tube is a crucial experimental apparatus in the field of explosive impact. Limited research has been conducted on the visualization of the internal flow field in shock tubes under blockage conditions, and there is a lack of comprehensive understanding of the mechanisms behind blockage effects. This paper presents experimental and numerical investigations into the propagation of shock waves inside a shock tube and their interaction with obstructive elements. Blockage effect experiments were conducted on a shock tube test platform, where pressure data were obtained through a pressure monitoring system. Additionally, schlieren imaging technology was employed to visualize the evolution of shock wave fronts. A two-dimensional numerical model of the shock tube was established using Fluent software, and the computed results exhibited excellent agreement with the experimental data, confirming the accuracy of the numerical model. The mechanism of the blockage effect was revealed through analysis of pressure-time curves and images depicting the evolution of shock wave fronts. Furthermore, adjustments to parameters on the validated numerical model allowed for analysis and comparison of different blockage ratios. The results indicate that the disturbance to the flow field caused by the blockage effect is primarily due to the reflection of shock waves between the front surface of the obstructive element and the shock tube wall. This reflection leads to differences in pressure curves compared to free-field conditions, and such differences increase with higher blockage ratios.
Shock Tube, Shock Wave, Blockage Effect, Visualization
1. Balan G S and Raj S A 2023 Int. J. Impact Eng. 172 104406
2. Saathoff P J and Melbourne W H 1987 J. Wind. Eng. Ind. Aerod. 26 353-70.
3. Jiang Z, Takayama K, Babinsky H and Meguro T 1997 Shock Waves 7 151-62
4. Murugan T, De S, Dora C L, Das D and Kumar P 2013 Fluid Dyn. Res. 45 025506
5. Arun K R and Pathak V 2021 Def. Technol. 17 1840-51
6. Zhao X, Chen C, Shi C, Chen J, Chen Q and Zhao D 2021 J. Therm. Anal. Calorim. 143 3245-56
7. Li J and Hao H 2021 Process Saf. Environ. Prot. 145 94-109.
8. Yao Z, Ren H, Shen Z and Wang Z 2012 Prot. Eng. 34 18-23.
9. Bunjong D, Pussadee N and Wattanakasiwich P 2018 J. Phy.: Conf. Ser. 1144 012097
The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Authors who publish this series agree to the following terms:
1. Authors retain copyright and grant the series right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this series.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the series's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this series.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See Open Access Instruction).